Cut three strips of pearl board 1 cm x 4 cm in three colours of your choice.

Use double sided tape to attach to the card blank-

Take two Crafty Bitz bells and attach diagonal to each other.

Punch out three snowflakes on white glitter board and attach in a diagonal fashion around the bells-

Use Peel off for a greeting.

Cut a 2 inch square pearl pearl board we've used white.

Cut a 1. 5 inch square from Glitter board green

Use 1 inch square of Mirror board.

Attach layered in the centre of a square card blank

Use Crafty bitz wire tree for the centre piece attach with glue dots for a secure fix.

Use peel off for words.

The greeting is designed using Greeting Card Factory software.

Using a Fran Reed Xmas peel off, attach to a card blank We've used a tree and two stars.

then used glitter green tulip paint to colour in the tree but not the dots.

Use red pearl Tulip paint to colour in the dots and the stars.

Cut a strip of red mirror board approx. 1 inch wide by 5 inches long attach to a card blank horizontally across the card, use Crafty bitz snowmen and attach as shown -

The words used are crafty bitz greeting tags 'Seasons greetings' these are attached between the snowmen.

Attach crafty bitz stars as shown use tulip paint or Diamontes to add some glitz to the centre of the stars.

Cut a strip of Glitter board - we've used white, size 1 inch in width and 4 inches in length attach horizontally across the card blank use double sided tape to fix.

Then cut a red mirror board strip size half inch x 3 inches and attached to the glitter board in the centre

Attach two white snowmen and then take one piece of crafty bitz pack CS 24 remove the red star from the wire and stick each end of the wire to the snowman allowing the wire embellishment to drop slightly in a curl between them.

Use Glue dots to achieve a secure stick. ( Or you can use silver wire and beads to make your own embellishment )

Attach to the card positioning the snowmen at each end of the mirror board.

Punch out two snowflakes in white glitter board and decorate with tulip paint or diamontes and attach as shown on the mirror board strip

The words are achieved using Greeting card factory

Cut a strip of white glitter board size half inch by 4 inches

Cut a strip of white pearl board the same size and attach both side by side horizontally across the card blank.

You can either punch out the christmas shapes using mirror board or glitter board or use confetti shapes attach as shown.

Attach Large diamontes as shown.

The greeting is achieved using Greeting card factory.

Cut a strip of green glitter board size half inch by 5 inches

Take a piece of green christmas tinsel and use christmas baubles thread the baubles on the tinsel then wrap the tinsel around the green glitter board strip.

Fiddle around with the baubles to get them in the correct position.

Attach the green glitter strip to the card blank use glue dots.

Attach the baubles to the card blank with glue dots in order to achieve the sprayed out effect.

The Greeting is archived using Greeting card factory.

Take a piece of handmade paper around 3 inches square and fray around the edges.

Use green glitter Tulip paint to draw a triangle adding a base. While paint is wet dab onto the tree red dots use red pearl Tulip paint and allow to dry.

when dry attach a red star and use a diamonte to add glitz in the centre of the card.

Attach the finished artwork to the card blank and use a peel off for the greeting.